Encapsulating coating for asbestos cement slabs.
Elastomeric waterproofing liquid membrane in water emulsion, coloured with modified acrylic co-polymers. COPERBIT COLOR reduces carbonation phenomena on concrete surfaces.
Once dry, it will form a strong and elastic film with excellent adhesion to the substrate and highly resistant to weathering agents and resilient to any fissures that may form in the substrate.
The product is odourless and non-flammable because it is free from solvents.
Available in white, grey, red, and green.
Basis | Water |
Appearance | Thixotropic fluid paste |
Colour | White, Grey, Red, Green |
Approximate consumption in relation to support | As a waterproofing agent: approx. 2.0 kg/m² in 2 coats As encapsulation: approx. 1.0 kg/m² in 2 contrasting coloured coats |
Application | Manual or spray |
Drying time out of powder | about 2-4 hours |
Application temperature | +5°C ÷ +35°C |
Stability in original closed tins | 24 months |
Packaging | 5 kg, 20 kg pails |
DESTINATIONS OF USE
COPERBIT COLOR is approved as a coating for encapsulation in the reclamation of cement-asbestos products in accordance with Ministerial Decree 20/08/1999 According to UNI 10686/98, which provides for the following methods of use:
TYPE A: visible encapsulation from the outside
TYPE B: visible encapsulation inside
TYPE C: non-visible encapsulation, or confinement interventions
TYPE D: temporary auxiliary encapsulation for removal
For types A and B it is MANDATORY that the colour of the second hand is contrasting with that of the previous hand.
WARNINGS AND RECOMMENDATIONS
Carefully read the technical data sheet and the safety data sheet, available on www.copernit.it.
- It fears frost. Stir well before use.
- Do not store packages below +5°C and protected from heat sources, in dry places.
- It is mandatory to follow all the laws relating to remediation through the encapsulation treatment of asbestos cement slabs.