Pigmented decorative elastomeric liquid waterproofing membrane based on acrylic copolymers modified in aqueous dispersion.
COPERBIT COLOR ECO reduces carbonation phenomena on concrete surfaces.
Once dry, it will form a strong and elastic film with excellent adhesion to the substrate and highly resistant to weathering agents and resilient to any fissures that may form in the substrate.
COPERBIT COLOUR ECO is odourless and non-flammable because it is free from solvents.
Available in white, grey, red, and green.
Basis | Water |
Appearance | Thixotropic fluid paste |
Colour | White, Grey, Red, Green |
Approximate consumption in relation to support | As waterproofing agent: approx. 1.5 - 2.0kg/m² in 2 coats |
Application | Manual or spray |
Drying time out of powder | about 2-4 hours |
Application temperature | +5°C ÷ +35°C |
Stability in original closed tins | 24 months |
Packaging | 5kg, 20kg pails |
DESTINATIONS OF USE
COPERBIT COLOR ECO is recommended to coat and waterproof concrete-structured roofs, terraces with concrete floors, It is used to waterproof concrete terraces, repair and/or decorate bituminous mantles.
It waterproofs old bituminous membranes without having to remove them.
In the waterproofing of concrete balconies, COPERBIT COLOR ECO can be applied before gluing the stoneware tiles or clinker where it is not possible to lay the bitumen-polymer membranes.
It may also be used upon fibre cement boards, wood, and metal surfaces as well as polycarbonate.
WARNINGS AND RECOMMENDATIONS
Read carefully the technical data sheet and the safety data sheet, available below.
- It fears frost. Stir well before use.
- Before painting new membranes, wait at least 6 months from their laying, except for membranes with a daring top finish or TEX that can be immediately painted. Do not apply directly to membranes with PE film and gloss film finish but remove the finish by flashing.
- Do not store packages below +5°C and protected from heat sources, in dry places.