Elastomer-bituminous liquid membrane to the solvent for cold application, ready to use.
It looks like an easily workable paste to be spread evenly on the laying surface.
Once dry, it allows to obtain an elastic, tough and waterproof film.
It has faster drying times than bituminous emulsions, good resistance to stagnant water and can also be used in winter.
Basis | Solvent |
Appearance | Liquid |
Colour | Black |
Dry Film Cold Flexibility | - 15°C |
Approximate consumption in relation to support | Coats: 2 Quantity per coat: 400 – 500 g/m² |
Application | Manual or spray |
Drying time out of powder | about 60 minutes |
Application temperature | +5°C ÷ +35°C |
Stability in original closed tins | 24 months |
Packaging | 5kg, 20kg pails |
DESTINATIONS OF USE
COPERBIT S is suitable for the waterproofing of foundations and concrete terraces affected by micro cracks when the use of polymer bitumen membranes is not expected or in place of the use of the bituminous primer only.
Due to its good waterproofing features, it is suitable to be used as an elastic liquid membrane in emergency work.
WARNINGS AND RECOMMENDATIONS
Carefully read the technical data sheet and the safety data sheet, available below.
• Do not use indoors.
• Apply in well-ventilated areas.
• Flammable product.
• Before painting new membranes, wait at least 6 months from their laying, except for membranes with a daring top finish or TEX that can be immediately painted. Do not apply directly to membranes with PE film and gloss film finish but remove the finish by flashing.
• Store and store the product in its original packaging, at a temperature of not less than +5°C.
• Do not expose to temperatures above +30°C, protected from heat sources and away from open flames, in dry and well-ventilated places.