DESTINATIONS OF USE

COPERGLUE BASE can be used in the following applications: cold-bonding and sealing of bituminous membranes on various types of surfaces consisting of concrete, wood and insulating panels (expanded polyurethane, mineral wool and expanded perlite), in place of the traditional flame application and cold-bonding and sealing onto old bituminous membranes.
It is recommended for waterproofing works at locations where the use of an open flame is prohibited, and for the installation of bituminous waterproofing membranes over combustible or fire-sensitive materials (i.e. wooden roofs) that prevent or discourage the use of flames.
Once dry, in addition to stubbornly bonding the membrane above, it creates an additional intermediate waterproof layer between the support and the membrane itself.
It also reduces stress due to microcracks in cement supports.
The covers must be horizontal, with a maximum slope of 5%; if the slope is greater, integrate the gluing by mechanical fixing.
Adhesion in total adhesion significantly reduces the tension generated by the thermal changes on the visible mantles, reducing the formation of folds.

WARNINGS AND RECOMMENDATIONS

Carefully read the technical data sheet and the safety data sheet, available on www.copernit.it.

• Do not use indoors.
• Apply in well-ventilated areas.
• Store and store the product in its original packaging, at a temperature of not less than +5°C.
• Keep protected from heat sources and away from open flames, in dry and well-ventilated places.