Home / Products / Liquid Systems / MASTICS AND ADHESIVES / COPERMAST W
COPERMAST W
Water-based bituminous mastic for cold bonding of insulating panels
Description
Description

Ready-to-use bituminous adhesive in water emulsions rich with high grade resins, bitumen, and mineral fillers.
The bituminous paste thus obtained, once dried, is characterized by good elasticity, adhesion to the support and permeability.

Features
Basis Water
Appearance Thixotropic paste
Colour Black, after drying
Approximate consumption in relation to support Application: surface - points
Quantity:
- Over the entire surface: 1.00 kg/m²
- Points: 0.400 – 0.500 kg/m² (5 points per square meter)
Application Operating instructions
Drying time out of powder about 30-60 minutes
Application temperature +5°C ÷ +35°C
Stability in original closed tins 12 months
Packaging 20 kg pails
Intended use
Flat Roofs
Pitched Roofs
Vaulted Roofs
Industrial Roofs
Terraces
Foundations and retaining walls
Roof Gardens

DESTINATIONS OF USE

COPERMAST W is used for fixing insulating panels of various kinds such as glass wool, rock wool, polyurethane or polystyrene vertically, horizontally and on the ceiling, on internal wall surfaces of buildings consisting of concrete, brick, cement, wood and other materials provided they have a sufficient porosity to absorb a part of the water contained in the product during the drying process.
It is also suitable for gluing insulation panels on bitumen-polymer membranes: in this case, it is recommended to install an adequate number of exhalers to allow the disposal of residual moisture during the mastic drying process.
For slopes greater than 5% the gluing must be integrated with mechanical fixing.
It is also used for the bonding of insulating panels put to protect concrete foundations waterproofed with bitumen-polymer membranes before the burial phase with gravel or stabilized.

WARNINGS AND RECOMMENDATIONS

Carefully read the technical data sheet and the safety data sheet, available below.

  • It fears frost. Once frozen, the product is no longer recoverable.
  • Apply at an ambient temperature of not less than + 5° C, and not more than 35 ° C.
  • Store and store the product in its original packaging, at a temperature of not less than +5°C. Do not expose to temperatures above +30°C and in any case protected from heat sources, in dry and well-ventilated places.