EMULBIT is a water-based bituminous emulsion also commonly called “cold asphalt.” It has the appearance of slightly viscous paste.
It is a non-toxic product and, being water-based, it is not flammable nor dangerous.
Basis | Water |
Appearance | Fluid paste |
Colour | Deep brown |
Approximate consumption in relation to support | Coats: 2 0.800 – 1.2 kg/m² in 2 coats |
Application | Manual |
Drying time out of powder | about 2-4 hours |
Application temperature | +5°C ÷ +35°C |
Stability in original closed tins | 12 months |
Packaging | 5kg, 10kg, 20kg pails |
DESTINATIONS OF USE
EMULBIT is suitable for waterproofing of foundation walls and of other external surfaces of concrete structures.
When used as top layer, the dried film must be protected with water-reflective paints such as ALU-PAINT W or SOLAR CERAMIC, with coloured elastomeric water coating of the COPERBIT COLOUR range, or with water-coloured decorative paints such as IDRO-COLOR.
It can be applied as a primer for concrete if diluted to 30-35% with water under stirring.
WARNINGS AND RECOMMENDATIONS
Carefully read the technical data sheet and the safety data sheet, available below.
- It fears frost. Once frozen, the product is no longer reusable.
- Do not use to waterproof structures, tanks, or containers, in which food products or liquids such as drinking water can be stored.
- Store and store the product in its original packaging at a temperature of not less than +5°C, protected from heat sources, in dry and well-ventilated places.