Pigmented coating designed for bituminous waterproofing membranes, rich with acrylic copolymers dispersed in a water base.
Once dry, IDRO-COLOR will form a weatherproof seamless elastic film with strong adhesion to the substrate, which will provide effective protection against deterioration caused by weathering agents and U.V. and weathering agents, as well as fixing the mineral finish on the bitumen-polymer membranes.
Basis | Water |
Appearance | Fluid paste |
Colour | White, Grey, Red, Green |
Approximate consumption in relation to support | Coats: 2 Quantity per coat: - 150-250 g/m² plain membranes - 350-450 g/m² Mineral membranes |
Application | Manual or spray |
Drying time out of powder | about 2-4 hours |
Application temperature | +5°C ÷ +35°C |
Stability in original closed tins | 24 months |
Packaging | 25 kg pails |
DESTINATIONS OF USE
IDRO-COLOR is particularly suitable for protecting and decorating powdered, sandblasted, and slate bitumen-polymer membranes, hot bituminous waterproofing with oxidized and cold bitumen with stabilized bituminous emulsions.
Available in four different colours (White, Grey, Red, Green), it is the ideal solution for conferring aesthetic value and protection against ageing of waterproofed roofs with bitumen-polymer membranes.
WARNINGS AND RECOMMENDATIONS
Carefully read the technical data sheet and the safety data sheet, available below.
- The product fears frost. Stir well before use.
- Before painting new membranes, wait at least 6 months from their laying, except for membranes with a daring top finish or TEX that can be immediately painted. Do not apply directly to membranes with PE film and gloss film finish but remove the finish by flashing.
- Store the product in its original packaging, at a temperature of not less than +5°C, protected from heat sources and away from open flames, in dry and well-ventilated places.