Bituminous primer containing quick-drying technical solvents. Main advantages: good adhering and penetrating properties, fast curing, absence of stickiness.
| Basis | Technical solvents |
| Appearance | Liquid |
| Colour | Black |
| Approximate consumption in relation to support | Coats: 1 Quantity per coat: 150 – 300 g/m² |
| Application | Manual or spray |
| Drying time out of powder | about 30-60 minutes |
| Application temperature | +5°C ÷ +35°C |
| Stability in original closed tins | 24 months |
| Packaging | 5l, 10l, 20l pails |
DESTINATIONS OF USE
PRIMER S
is used as prime coat to block the effects of dust and seal the porosity of concrete surfaces. It contributes to speed up and improve the application of bituminous waterproofing membranes, both torch- and cold-applied, such as COPERGLUE BASE.
It can also be applied to aged polymer bitumen membranes or metal surfaces without painting, galvanising, or rusting.
It is used as a waterproofing paint in concrete foundation walls, as a fixing primer for cement, wood, and metal surfaces and for the protection and waterproofing of exposed and buried pipes and metal tanks.
WARNINGS AND RECOMMENDATIONS
Carefully read the technical data sheet and the safety data sheet, available below.
- Do not use indoors. If the application will be conducted on roofs of residential buildings and/or in enclosed environments, PRIMER S must be replaced with the bituminous water-based PRIMER W.
- Store the product in its original packaging, at a temperature of not less than +5°C, protected from heat sources and away from open flames, in dry and well-ventilated places.