Bituminous solution based on selected bitumen and technical solvents.
The product is characterised by the rapid drying of the film, excellent penetration and adhesion to the surface, and the absence of stickiness even on slightly damp surfaces (maximum 3%).
| Basis | Technical solvents |
| Appearance | Liquid |
| Colour | Black |
| Approximate consumption in relation to support | Coats: 1 Quantity per coat: 150 – 250 g/m² |
| Application | Manual or spray |
| Drying time out of powder | about 30-60 minutes |
| Application temperature | +5°C ÷ +35°C |
| Stability in original closed tins | 24 months |
| Packaging | 5l, 10l, 20l pails |
DESTINATIONS OF USE
PRIMER WET-DECK is an excellent adhesion promoter for laying bitumen-polymer membranes and is used on bridges and/or viaducts in concrete as a grip base coat before hot spreading of the polymer bitumen membranes of the EXTRA BRIDGE range.
It is used to block the dustiness and porosity of flat and inclined concrete surfaces, such as roofs and walls of foundations for civil or industrial buildings in the presence of slight humidity (maximum 3%).
What is more the product is used as a base coat to block the dustiness and porosity of concrete surfaces, allowing the rapid application of bituminous membranes, such as COPERGLUE BASE, both in flame-retardant and cold-retardant applications, or before the installation of bituminous liquid membranes.
It can also be applied to wooden or metal surfaces without painting, galvanising, or rusting.
WARNINGS AND RECOMMENDATIONS
Carefully read the safety data sheet, available below.
- Do not use indoors.
- Do not mix with water.
- Do not use to waterproof structures, tanks, or containers, in which food products or liquids such as drinking water can be stored.
Store the product in its original packaging, at a temperature of not more than +30°C, protected from heat sources and away from open flames, in dry and well-ventilated places.